TL80L Security alarm signal device indicator lights warning lights, warning lights signal transmission industry

LED Steady/Flashing Signal Lights

LED Bright light-emitting diodes SERIES-82mm

Product Features

1.Poly shoot novel optical structure of industrial safety warning products emitting more uniform and efficient

2.Independent design, high brightness LED Steady / Flashing / rotating light / warning light, lights

3.Applied to the on-site safety alerts, safety tips, warnings and so on.

4.Products internal circuit boards fitted with light-emitting mode selector switch, the user can choose according to site demands long bright, shiny, detailed selection method in the table below

5. suitable for container spreader, the port, various signal conveys, such as House Transportation machinery and machine tool equipment, driving, cranes, conveyer equipment, complete sets of equipment, production lines and other industrial warning

6. lamp color: red yellow-Y green-G blue-B white-R-w

7. shiny number: 60~80/MIM

8. volume: (built-in buzzer): 90dB (32 sounds inside): 110dB

9. materials: Lampshade-PC base-ABS.

10. protection class: IP65 (according to custom IP66)

Product Specifications

model

Built-in sound

voltage

current

weight

flashe

Color

TL80L(Long bright)

Intermittent beep-90DB 

DC12V

 0.136A

0.150Kg

60-80Per/Min

RED-R

TL80LF(Brilliant)

DC24V

 0.116A

YELLOW-Y

TL80LR(Rotating lights)

Continuous beep-90DB 

AC110V

 0.056A

0.176Kg

GREEN-G 

TL80LS(Frequency shiny)

32Sound-110DB

AC220V

0.033A

BLUE-B

CS86HL(Super bright)

AC380V

0.023A

White-W

Content can be customized:

1. super bright LED (HL) products, and special voltage products (DC220V,DC110V, AC48V,DC48V, AC440V, and so on) can be customized.

2. remote control, voice-activated, light, sound and light control, battery, rechargeable, power outages, alarms, and other special requirements can be customized.

* Overall installation diagram

* Wiring

Power cord into port (CABLE ENTRY)

1. power cord inlet: standard specification: M5

Wiring

1.AC Power Products: positive and negative points do not directly connect the power

2.DC power supply product: black wire is connected to the negative terminal (-).

Custom-made products: led power lines and signal lines。

1.Leads power cord specifications:UL1015-NO18(0.75sq) x 2c 400mm

2.Leads to the signal line specifications: UL1007-NO.22(0.3sq) 400mm

* Precautions when using

1 This product is for outdoor use waterproof, dustproof structure of the product, connect the power cord, or other switching operations and other operations, the disassembly, assembly, when each part of the fixing bolts must be tightened to ensure that the product waterproof, dustproof performance.

2 Connect the power cord inlet with waterproof connector or explosion-proof fittings, ensuring a closed performance. When the power cord is not closed on the outside entrance of the state, due to moisture or intrusion of foreign matter such as dust and damage the product.

3 than the rated voltage of the voltage increase or decrease the amplitude is too large when used will shorten the life of the product or result in undesirable operation of the product problems. Please ensure that the use of voltage within the rated voltage range of ± 5%.

4 lens or body surface contact with corrosive chemicals can damage the product when the product deformation or cause fading and other issues, the user should pay special attention.

5 Do not give the product a strong impact, which will become part of the cause of damage or disconnection

6 Do not put the product exposed wires stretched mandatory. This is one of the cause of the failure.

Please read the user manual carefully and refer to the product structure diagram follow the correct usage.

* Lights long bright / shiny choice

To facilitate the use of the mounting plate with long bright / shiny selector switch. Want to read the instructions carefully and refer to the product structure diagram follow the correct approach.

1.separate shade: counterclockwise rotation shade shade separation, confirmed long bright LED circuit board / shiny selector switch. (Below)

2.Steady / Flashing action selection switch:

a). using Steady / Flashing selector switch, select the desired action

b). lit when the switch is in the L position.

c). flashes when the LF position.

* Model Selection

TL80L

 - BZ1   -

 220   -

R   -

 YK

Model

Sound

Voltage

Shade color

Control

TL80L(Long bright)

BZ1(Continuous sound-90DB)

12-DC12V

RED-R

No - Standard

TL80LF(Brilliant)

BZ2(Intermittent sound-90DB)

24-DC24V

YELLOW-A

YK-Remote control

TL80LR(Rotating lights)

Y32(32 kinds of warning tone-110DB)

36-AC36V

GREEN-G 

GK-Light control

TL80LS(Frequency shiny)

110-AC110V

BLUE-B

O-Other wise

CS86HL(Super bright)

220-AC220V

White-W

380-AC380V