TL125NL Safety warning lights, warning lights, lights

LED Spreader lights, warning lights signal transmission

LEDBright light-emitting diodesSERIES-125mm

Product Features

1. the economic and practical industrial safety products

2. using technology independent design, high brightness LED light/flashing warning lights, lights

3. apply safety warning, safety instructions, warnings and so on.

4. the internal circuit board equipped with light emitting mode select switch, users can choose according to demand long, shiny, detailed options shown in the table below

5. suitable for container spreader, the port, various signal conveys, such as House Transportation machinery and machine tool equipment, driving, cranes, conveyer equipment, complete sets of equipment, production lines and other industrial warning

6. lamp color: Red-R, yellow-Y, green-G, blue--B, white-W,

7. shiny number: 60~80/MIM

8. volume: (when the built-in buzzer) 90dB (32 different beep -110dB)

9. volume: (Y32 32 sounds via the internal DIP switches select the tone) MAX:110dB

11. materials: Lampshade for PC, base-ABS, mirror-heat-resistant ABS

12. protection class: IP54 (can be customized according to customer IP65)

Product Specifications

model

Built-in sound

voltage

current

weight

flashe

Color

TL125NL  TL125NLF TL125NL-Y32

Intermittent beep-90DB 

DC12V

 0.270A

0.32Kg

60-80Per/Min

RED-R

DC24V

 0.210A

YELLOW-Y

Continuous beep-90DB 

AC110V

 0.067A

0.79Kg

GREEN-G 

32Sound-110DB

AC220V

0.035A

BLUE-B

AC380V

0.028A

White-W

Content can be customized:

1. super bright LED (HL) products, and special voltage products (DC220V,DC110V, AC48V,DC48V, AC440V, and so on) can be customized.

2. remote control, voice-activated, light, sound and light control, battery, rechargeable, power outages, alarms, and other special requirements can be customized.

* Overall installation diagram

* Wiring

Power cord into port (CABLE ENTRY)

1. power cord inlet: standard specification: M5

Wiring

1.AC Power Products: positive and negative points do not directly connect the power

2.DC power supply product: black wire is connected to the negative terminal (-).

Custom-made products: led power lines and signal lines。

1.Leads power cord specifications:UL1015-NO18(0.75sq) x 2c 400mm

2.Leads to the signal line specifications: UL1007-NO.22(0.3sq) 400mm

* Precautions when using

1 This product is for outdoor use waterproof, dustproof structure of the product, connect the power cord, or other switching operations and other operations, the disassembly, assembly, when each part of the fixing bolts must be tightened to ensure that the product waterproof, dustproof performance.

2 Connect the power cord inlet with waterproof connector or explosion-proof fittings, ensuring a closed performance. When the power cord is not closed on the outside entrance of the state, due to moisture or intrusion of foreign matter such as dust and damage the product.

3 than the rated voltage of the voltage increase or decrease the amplitude is too large when used will shorten the life of the product or result in undesirable operation of the product problems. Please ensure that the use of voltage within the rated voltage range of ± 5%.

4 lens or body surface contact with corrosive chemicals can damage the product when the product deformation or cause fading and other issues, the user should pay special attention.

5 Do not give the product a strong impact, which will become part of the cause of damage or disconnection

6 Do not put the product exposed wires stretched mandatory. This is one of the cause of the failure.

Please read the user manual carefully and refer to the product structure diagram follow the correct usage.

* Lights long bright / shiny choice

To facilitate the use of the mounting plate with long bright / shiny selector switch. Want to read the instructions carefully and refer to the product structure diagram follow the correct approach.

1.separate shade: counterclockwise rotation shade shade separation, confirmed long bright LED circuit board / shiny selector switch. (Below)

2.Steady / Flashing action selection switch:

a). using Steady / Flashing selector switch, select the desired action

b). lit when the switch is in the L position.

c). flashes when the LF position.

* Model Selection

TL125NL    -

BZ   -

220   -

R

Model

Sound

Voltage

Shade color

TL125NL(Long bright)

BZ1(Continuous sound-90DB)

12-DC12V

RED-R

TL125NLF(Brilliant)

24-DC24V

YELLOW-Y

TL125NHL(Super bright)

BZ2(Intermittent sound-90DB)

110-AC110V

GREEN-G 

TL125NLS(Frequency shiny)

BLUE-B

TL125NL-Y32

Y32(32 kinds of warning tone-110DB)

220-AC220V

White-W

TL125NLF-Y32

380-AC380V